Details

---

CVM-E3-Mini Three-Phase Power Analyzer

Product Description

Three-Phase Power Analyzer(balanced and unbalanced) for its assembly on DIN rails with very small dimensions, measuring in 4 quadrants.

Features

• Current measuring .../5 or .../1 A
• DIN rail format with only 3 modules
• Assembly on the 72 x 72 mm panel with frontal adaptor (cod. M5ZZF1)
• RS-485 Communications (Modbus-RTU)
• Two transistor outputs
• ITF technology: galvanic insulation protection inputs inputs, depending on the type
• Selection of parameters displayed
• Default page selection
• Universal power supply for the Plus type
• Sealable

CVM Mini Display



CVM-Mini-MC

• Application for the control of switchboards and low and medium voltage connection points, where an analyzer must be installed on the DIN rail due to space restrictions.
• Control of instantaneous, maximum and minimum values of the electrical parameters metered.

Specification

Power supply circuit	230 V ac (-15...+10%) Plus: 85..0.265 V ac / 95...300 V dc
Consumption	3 V·A
Frequency	45...65 Hz
Metering circuit
Nominal voltage	300 V ac (ph-n) / 520 Vac (ph-ph)
Frequency	40..0.65 Hz
Voltage consumption of the circuit	0.7 V·A
Current consumption of the circuit	ITF 0.9 / Shunt 0.75 V·A
Transformadores	.../5 A ó.../ 1 A / 250 mA
Minimum direct current	110 mA
Maximum direct current	6 A
Maximum current con transformador	In /5 1,2 In
Class/Accuracy
Voltage	0.5 % ± 1 digit
Current	0.5 % ± 1 digit
Power rating	1 % ± 1 digit
Ambient conditions
Operating temperature	-10 ... +50 ºC
Relative humidity (non-condensing)	5 ... 95%
Altitud	2000 m
Humidity	20-90%RH
Output transistor	Optoinsulated (collector open) NPN
Maximum switching voltage	24 V dc
Maximum switching current	50 mA
Maximum impulse frequency	5 impulse / s
Duration of the impulse	100 ms / 100 ms
Build features
Type of box	VO self-extinguishing plastic
Degree of protection	Embedded equipment: IP 41 Terminals: IP 20
Dimensions	52.5 x 85 x 67.9 mm (3 modules)
Weight	210 g
Safety

Designed for CAT III 300/520 Vac installations, in accordance with EN 61010.
Double-insulated electric shock protection, class II

Standards

IEC 664, VDE 0110, UL 94, IEC 801, IEC 348, IEC 571-1, EN 61000-6-3, EN 61000-6-1, EN 61010-1


Power Analyzer / Energy Values / Circutor / Electric Parameters / Low Voltage / ARON Connection / Backlit LCD SCREEN / Single-Phase. CVM-C10 from Saturn Pyro is the best available in Malaysia. High performance and cost effective Power Energy Meter with 4-quadrant measurement (consumption and generation). Suitable for Medium or Low voltage installations, in both 3 or 4-wire three-phase circuits, two-phase circuits with or without neutral, single-phase circuits or ARON connections. Available in Penang, KL, Selangor, Johor, Sabah, Sarawak & anywhere in Malaysia & Singapore. 


Saturn Pyro provides reliable engineering services such Electrical Safety Survey, Power System Studies (Short Circuit, Load Flow & Protection Discrimination on ETAP), Arc Flash Assessment & Labeling, Design Of Earthing & Lightning Protection, Measurement Of Touch & Step potentials, Power Quality Management, Energy Audit and Data Center Performance Assessment. We also provides Electrical Safety Survey such as Inspection of an electrical installation, Identification of risk (electrical hazards), Review of documentation, operations & maintenance procedures, contingency planning, Generation of report in details of risk potentials and plan for mitigation, Closing report post implementationas. Available in Pulau Pinang, Johor, Kuala Lumpur (KL), Selangor and anywhere in Malaysia / Singapore / Bangalore / India / Mumbai.